Fast & Easy Installation

• You need the SnapFast Installation Tool (part number #SF03003) and an insulated hot stick for live lines up to 115 kV. For higher voltages we advise installing on the top static/ground wire.
• Safe to use with OPGW lines.
• The SnapFast clamp comes in two sizes for wire diameters from 10–70 mm (0.39–2.75 in.) or 4–16 mm (0.16 to 0.63 in.).
• Recommended spacing is every 30 feet.
• Installation starts by pulling the clamp’s large finger holes apart to open the clamp (see photo at left).
• Warning! Handle the opened clamp very carefully, as it snaps closed with significant force and could cause injury.
• The open clamp is placed on the installation tool (attached to a hot stick) and pressed against the line until the clamp springs closed.
• To remove the clamp, simply hook one of the large finger holes with the installation tool and pull down to open. The open clamp slides onto the hook.

PDFs

SnapFast Clamp Instructions (PDF)